HoldTight®102 Representative COATING COMPATIBILITY CHART

Ameron  
AMERCOAT 385 Multi-purpose epoxy coating
DIMETCOTE 21-9 Inorganic zinc silicate primer (solvent based)
AMERLOCK - 400 High solids epoxy coating
AMERSHIELD Graffiti control coating
Carboline  
BITUMASTIC 300M Coal tar epoxy polyamide, 2-component, chemically cured
CARBO ZINC 11 Inorganic zinc-rich primer, low VOC, self-curing (87% zinc in dry film, zinc silicate)
CARBO ZINC 11 HS Inorganic zinc-rich primer, low VOC, high solids, self-curing
CARBO ZINC 11 VOC Inorganic zinc-rich primer, VOC compliant, high solids, self-curing (86% zinc in dry film)
CARBOMASTIC - 801 Hi-build epoxy mastic
CARBOLINE 187 Modified epoxy, phenolic, amine, adduct cured
CARBOLINE 858 Organic zinc-rich epoxy primer, high solids
CARBOLINE 859 Organic zinc-rich epoxy primer, high solids
CARBOLINE 893 Cross-linked epoxy, high-solids, hi-build
CARBOMASTIC 14 Coal tar epoxy
CARBOMASTIC 15 Aluminum epoxy mastic, modified 2-component , hi-build
CARB0MASTIC 15 LO Aluminum flake-filled epoxy mastic
CARBOMASTIC 90 Aluminum-filled epoxy mastic
POLYCLAD 600M Coal tar polyurethane, 1-component, moisture cured, micaceous iron oxide
SUPER HI-GARD 891 Cross-linked epoxy, self priming, high solids, hi-build
Hempel  
HEMPADUR 1557 Polyamide-adduct cured epoxy paint, 2-component
HEMPADUR 4514 Two-component, polyamide adduct-cured epoxy paint
HEMPADUR 4515 Two-component, high solids, polyamide-cured epoxy paint
HEMPADUR 4563 U Modified polyamide cured epoxy, hi-build, 2-component
International
INTERPRIME CPA099V RED Multi-purpose high performance primer (one-pack)
INTERZINC EPA075V / 076V RED Zinc rich epoxy primer (two-pack)
INTERZINC QH028 22 SILICATE Zinc ethyl silicate coating (two-pack)
INTERTUF KHA062 KH SERIES Self priming, anti-corrosive epoxy (two-pack)
INTERGARD FPA327 FP SERIES Self priming, anti-corrosive epoxy, hi-build (two-pack)
PPG General approval for most coatings, when HoldTight® 102 is used as directed
CONTACT: John Simser, HPC Sales Technical Services Manager, phone 412.434.4141,   fax 412.434.3991
Sherwin-Williams
COROTHANE II Aliphatic acrylic modified polyurethane, 2-component
COROTHANE I MC TAR Coal tar moisture cure urethane, micaceous iron oxide, 1-component, high solids, VOC compliant, immersion
COROTHANE I MC ZINC Moisture cure urethane, zinc-rich primer, 2-component, VOC compliant
DTM ACRYLIC PRIMER / FINISH Waterborne 100% acrylic emulsion
DURA-PLATE 154 EPOXY COATING (consult manufacturer)
DURA-PLATE 235 MULTI PURPOSE Modified epoxy phenalkamine, immersion and atmospheric
DURA-PLATE UHS EPOXY Ultra high solids epoxy amine, hi-build, immersion
DURA-POX - WB EPOXY PRIMER Water-based epoxy primer, 2-component, VOC compliant, phenalkamine
EPOLON II PRIMER Catalyzed polyamide epoxy primer, high solids, 2-component
EPOXIDE 33/34 NSE EPOXY Catalyzed epoxy amine, VOC compliant, lead and chromate free, 2-component, hi-build, self-priming
EPOXY MASTIC ALUMINUM II Aluminum filled, polyamide bisphenol epoxy, high solids
HI MIL SHER-TAR EPOXY Polyamid cured, epoxy coal tar, hi-build
HI SOLIDS CATALYZED NSF EPOXY Polyamide / bisphenol epoxy, high solids
KEM BOND HS UNIVERSAL PRIMER Alkyd metal primer, fast drying, high solids, low VOC
KEM KROMIK UNIVERSAL PRIMER Modified alkyd resin primer, low VOC
MACROPOXY HS EPOXY Polyamide epoxy, high solids, hi-build
PHENICON HS Phenolic epoxy, high solids
POLYLON 1900 Polyester-aliphatic urethane, high solids, 2-component
PRO-CRYL UNIVERSAL PRIMER Self cross-linking acrylic primer
RECOATABLE EPOXY PRIMER Catalyzed polyamide / bisphenol epoxy, hi-build
SHELCOTE II Amine cured epoxy, high solids
ZINC CLAD II HS Inorganic ethyl silicate, three-pack, zinc rich coating (solvent based)
ZINC CLAD IV Organic zinc-rich polyamide epoxy, 2-component
ZINC CLAD XI - WB (INORGANIC) Water based inorganic zinc silicate coating, 2-pack high zinc content, no VOC
Sigma  
COLTURIET #7415 PRIMER Polyamide cured epoxy resin
SIGMACOVER 2P PRIMER Polyamide cured epoxy with rust preventive pigments
SIGMAGUARD HSV EPOXY #5476 High-solid epoxy, 2-component, hi-build
SIGMACOVER TCP #7476 Amine adduct cured, modified epoxy coating, 2-component, hi-build
NUCOL CRHB PRIMER #7303 High-build primer (based on chlorinated rubber) pigmented with micaceous iron ore
SIGMARINE PRIMER 2P #7135 Anti-corrosive primer (based on alkyd resin) pigmented with zinc phosphate
SIGMA SP 16 COAL TAR #3304 Polyamide cured coal tar epoxy coating, 2-component, hi-build
Tnemec  
CHEMPRIME H. S SERIES 37H Phenolic alkyd
HI-BUILD EPOXYLINE SERIES 66 Polyamide epoxy
TNEME-ZINC 90E - 92 Ethyl silicate inorganic zinc-rich
TNEME-ZINC 90 - 97 Aromatic urethane, zinc-rich
H. S. EPOXY SERIES 104 Cycloaliphatic amine epoxy
VINESTER SERIES 120 Vinyl ester
Valspar  
Generic Alkyd
Generic Epoxy
Generic Inorganic zinc
Acro  
ACRO - 4422 Polyamide epoxy primer, 2-component, rust inhibitive
ACRO - 4460 Polyamide epoxy (chemically resistant) 60% solid by volume
Dampney General approval for all coatings, when HoldTight® 102 is used as directed
  CONTACT: Tom Train, Technical Manager, phone 617.389.2805, fax 617.389.0484
Lord Elastomers
CHEMLOK - 289 Rubber lining adhesive system
CHEMLOK - 290 Polymers, organic compounds and mineral filler dissolved in organic solvent
CHEMLOK -286 Tacky tie cement
Plasite  
PLASITE - 7156 Epoxy (polymerized with amine adduct-type curing agent) water-resistant
PLASITE - 4300 Vinyl ester resin (with special curing system and inert flake pigments)
PLASITE - 3070 Phenolic resin (baked, unmodified)
Polibrid  
POLIBRID - 705 Elastomeric polyurethane (solventless)
POLIBRID - P302 Vinylurethane (with zinc phosphate complex inhibitive pigments)
 
This list is not intended to be complete or definitive. It is representative only. Consult your coating supplier and/or HoldTight Solutions Inc., for manufacturers or coatings not on this list.